Hitachi UX2 - Page 126

102
WARNING
● Do not look at the red LED for a long time.
Doing so may adversely affect your eyes.
Check list of ink drop creation states
Shape of ink drop
Judgment
Name
Remarks
○
A mode
Good
○
B mode
Perfect
○
High-speed small-
diameter mode
Small-diameter drops
two or less
Acceptable
×
Constant-speed small-
diameter mode
Unacceptable
×
Low-speed small-
diameter mode
Disabled
If the shape of ink drop is "Unacceptable", perform the procedure described in "5.10. Updating
Excitation V-ref." to update to the optimum excitation V-ref. value, and check the shape again.
Alternatively, contact your nearest local distributor.
After checking the ink drop state, remember to install the print head cover.
3