● Wear protective gear (goggles and mask) when operating.
● If any ink or makeup enters your eyes or mouth, immediately flush with warm or cold water and
consult a physician.
● Before ejecting the ink, make sure that there is no one in the ejection direction. (Operate with
the end of the print head inserted in a beaker, etc.)
Display the [Circulation control] screen and press [Process prior to long-term shutdown].
[Circulation control] screen (selecting [Process prior to long-term shutdown])
Read the guidance shown below, and press OK.
[Process prior to long-term shutdown] screen (guidance)
To Next Page
Loading...
