137
■
4 The screen below appears after starting Head Cleaning + Ink Ejection (S).
● To abort the process, press the Abort button.
■
5 Press the Start/Continue key
Startup screen
●If some faults occur when automatic circulation during stop (S) is in progress, automatically this
process restart only once after cleaning print head. If faults appear again, please follow
guidance on the message which is displayed on screen.
●If any vibration or impact is applied to the print head during removing print head from Cleaning
station, there is possibility that print head get dirt.
Ink jet completed.
Be careful ink dirt when remove the print head from Safe Clean Station.
After confirmation, please press ＜Start/Continue＞
To Next Page
Loading...
