i
Preface
Hitachi Inkjet (IJ) Printer (hereinafter referred to as "the unit") employs a non-contact, ink-jet method to print
onto a print target.
This Technical Manual (hereinafter referred to as "this manual") describes more technical details such as
installation and electric wiring.
The separate instruction manual describes the basic operating procedures, maintenance procedures, and
other detailed handling procedures of the unit.
Proper handling and maintenance of the unit are important to operate it smoothly. It is therefore essential
that you read this manual thoroughly to gain a complete understanding of the printer and use it correctly.
After reading the manual, properly keep it with the related documents for future reference.
<Scope of application>
This manual is prepared for all the models of "HITACHI IJ Printer Model UX2 for Dye Ink", which are listed
in the table below.
Please be advised that the differences among these models such as a model type and nozzle diameter or
applicable functions are referred to in the relevant section in this manual.
[HITACHI IJ Printer Model UX2 for Dye Ink]
To Next Page
Loading...
