Hitachi UX2 - 1.1. Purpose and Function Description; 1.2. Usage Precautions; 1.2.1. Ink and Makeup

2
List of delivered items and accessories (continued)
No.
Item name
Quantity
Parts code
No.
Remarks
13
Waste tube
1
-
Used when replacing ink or a filter.
(using the beaker with handle instead of
the waste solution bottle)
14
Ferrite core
2
-
When connecting the LAN cable to the
IJ Printer, put one core around the cable
outside the printer and the other through
one loop of the cable inside the printer as
shown below.
15
I/O plug
10 pins
1
-
Used to connect the input/output (I/O)
signals. See "4" in this manual for details
on how to use the plug.
16
I/O plug
13 pins
1
-
Used to connect the input/output (I/O)
signals. See "4. Connecting Electric
Signals" in this manual for details on
how to use the plug.
17
(*1)
Nozzle rubber seal
1
-
Used when the IJ Printer will not be used
for several days. This is described in
"5.15.1. Process prior to Long-term
Shutdown".
18
(*1)
Supply port cap
2
-
It is attached to the ink/makeup reservoir
when shipped. Used when the IJ Printer
will not be used for several days.
(*1) Store these items in a plastic bag, etc., to protect them from dirt and dust.
Outside IJ Printer
Inside IJ Printer