Intended audience
This document is intended for system administrators, Hitachi Data Systems
representatives, and authorized service providers who install, configure, and
operate the storage system.
Readers of this document should be familiar with the following:
• Data processing and RAID storage systems and their basic functions.
• The Hitachi Virtual Storage Platform storage system and the Hardware
Guide for your storage system model.
• The Device Manager - Storage Navigator software and the System
Administrator Guide for your storage system model.
• Hitachi Dynamic Provisioning, Hitachi Dynamic Tiering, Hitachi LUN
Manager, Hitachi LUN Expansion, Hitachi Virtual LVI, Hitachi Virtual LUN,
and Hitachi Data Retention Utility.
Product version
This document revision applies to the following microcode or firmware:
• VSP G1000, G1500, and VSP F1500: microcode 80-05-4x or later
• VSP G200, G400, G600, G800, VSP F400, F600, F800: firmware 83-04-4x
or later
• SVOS 7.2 or later
Release notes
Read the release notes before installing and using this product. They may
contain requirements or restrictions that are not fully described in this
document or updates or corrections to this document. Release notes are
available on Hitachi Data Systems Support Connect:
https://
knowledge.hds.com/Documents.
Changes in this revision
Expanded enhancements for DP pools, which include the ability to set the
maximum reserved V-VOL capacity against the pool capacity, when creating a
DP pool.
Related documents
Hitachi Virtual Storage Platform Gx00 and Fx00 documents
• Product Overview, MK-94HM8013
10 Preface
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series
To Next Page
Loading...
Need help?
General