Hitachi VSP G400 User Guide

For more information about the Delete LDEVs window, see the Provisioning
Guide for your storage system.
Procedure
1. In the Explorer pane, click Storage Systems, expand the storage
system tree, and then click Logical Devices.
2. In the Logical Devices window, from the list of volumes, select the
check boxes for the V-VOLs that you want to delete, click More Actions
> Delete LDEVs, and then confirm the settings.
3. Accept the default task name or enter a unique name.
You can enter up to 32 letters, numbers, and symbols, except the
following:
\ / : , ; * ? " < > |
4. If you want to monitor the task after submitting it, select Go to tasks
window for status.
5. Click Apply to submit the task.
Related tasks
•
Deleting Thin Image pairs on page 146
Viewing snapshot data capacity (VSP G1000, G1500, and
VSP F1500)
You can use the raidcom command to view the snapshot data capacity for
each P-VOL.
192 Monitoring and maintaining Thin Image
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English