Item Description
Capacity Saving
Information about the LDEV's capacity saving function.
• Compression: The compression function is used.
• Deduplication and Compression: The deduplication
function and the compression function are used.
• Disabled: The capacity saving function is not used.
T10 PI The LDEV's T10 PI attribute information.
• Enabled: The LDEV's T10 PI attribute is enabled.
• Disabled: The LDEV's T10 PI attribute is disabled.
Snapshot Group The snapshot group name.
New Snapshot Group Indicates whether the snapshot group is new or existing.
Values:
• Yes: Newly created snapshot group.
• No: Already defined snapshot group.
Number of Snapshot Data The number of snapshot data.
Pool Name (ID) The pool name and identification number.
Pool Encryption The pool's encryption information.
• Enabled: A pool was created by the pool volume for
which encryption is enabled.
• Disabled: A pool was created by the pool volume for
which encryption is disabled.
• Mixed: A pool contains two or more of the following:
â—‹ Volume for which encryption is enabled
â—‹ Volume for which encryption is disabled
â—‹ External volume
Note: Data encryption is not ensured in an LDEV with Mixed
encryption status.
For pools created in external volumes, or blocked pools, a
hyphen (-) is displayed.
Cascade
(VSP G1000, G1500, and VSP
F1500)
Indicates whether a cascaded pair can be created
• Enabled: Cascaded pairs can be created.
• Disabled: Cascaded pairs cannot be created.
Pair Type
(VSP G1000, G1500, and VSP
F1500)
Select the pair type.
• Snapshot: A pair with the snapshot attribute.
• Clone: A pair with the clone attribute.
Remove button Click to remove the selected row from the Selected Primary
Volumes table.
Assign Secondary Volumes window
Use this window to select the LDEVs that are the S-VOL.
This window is the second window of the Create TI Pairs wizard.
The following image shows this window.
258 Thin Image GUI windows and wizards
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series