Description
Code
Description Explanation
2001 PAIR The volumes are paired. The pair has been
created.
2011 PSUS The pair was split.
2020 SMPL START The pair deletion starts.
2021 SMPL END The pair deletion ended normally.
2030 COPY(RS-R) START The pair is in the process of being restored.
2031 COPY(RS-R) END The pair was restored.
2032 COPY(RS-R) ENDED ABNORMAL The pair restoration process has failed.
2040 INITIALIZE START Initialization processing starts.
2041 INITIALIZE END Initialization processing ended.
2042 INITIALIZE ENDED ABNORMAL Initialization processing ended abnormally.
2050 COPY(RS) START The pair is in the process of being
resynchronized.
2051 COPY(RS) END The pair resynchronization ended normally,
and the snapshot data was deleted.
2052 COPY(RS) ENDED ABNORMAL The pair resynchronization ended abnormally.
2070 PSUE(ABNORMAL END) A failure occurred and the pair is suspended.
The pair status changed to "PSUE".
2080 ASSIGN SECONDARY VOLUMES An S-VOL is assigned to snapshot data.
2081 REMOVE SECONDARY VOLUMES The assignment of an S-VOL to snapshot data
is released.
2082 REPLACE SECONDARY VOLUMES The assignment of an S-VOL to snapshot data
is changed.
2091 CLONE START Cloning pairs starts.
2092 CLONE END Cloning pairs ended normally.
2093 CLONE CANCEL Cloning pairs was interrupted.
2094 CLONE ENDED ABNORMAL Cloning pairs ended abnormally.
Viewing licensed capacities
You can view the licensed capacities using the Replication window.
Before you begin
• You must have the Storage Administrator (Local Copy) role.
Procedure
1. In the Explorer pane, click Storage Systems, expand the storage
system tree, and then click Replication.
2. View a list of licensed capacity in the summary section of the
Replication window.
Monitoring and maintaining Thin Image 169
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series
To Next Page
Loading...
Need help?
General