Hitachi VSP G400 User Guide

The terms "microcode" and "firmware" refer to the same thing. The term
"microcode" is used for VSP G1000, G1500, and VSP F1500, and the term
"firmware" is used for VSP G200, G400, G600, G800.
Definition of failure
When a failure occurs in a cascade configuration, in addition to the volume in
which the failure occurs, the following volumes are also suspended:
• Cascaded volumes under the volume in which the failure occurred.
• Volumes (including their cascade volumes) older generationally than the
volume in which the failure occurred.
The following figure illustrates the volumes to be suspended when a failure
occurs.
Monitoring and maintaining Thin Image 195
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English