Hitachi VSP G400 User Guide

8. If you want to monitor the task after submitting it, select Go to tasks
window for status.
9. Click Apply to submit the task.
Related references
• Assign Secondary Volumes window on page 289
Releasing assignment of secondary volumes from Thin
Image pair snapshot data
You can release the assignment of S-VOLs from snapshot data of Thin Image
pairs.
Note: If the amount of snapshot data in selected P-VOLs or the total number
of pairs in selected snapshot groups exceeds 32,768, an error message
appears when attempting to perform pair tasks.
Before you begin
• You must have the Storage Administrator (Local Copy Pair Unmap) role.
Procedure
1. In the Explorer pane, click Storage Systems, expand the storage
system tree, expand Replication, and then click Local Replication.
2. In the Local Replication window, select a P-VOL in the TI Root
Volumes tab or a snapshot group in the Snapshot Groups tab.
3. Click Operate TI Pairs.
4. In the TI Pairs window, select the S-VOL pairs you want to delete, and
then click More Actions > Remove Secondary Volumes.
5. In the Remove Secondary Volumes window, confirm the settings.
6. Accept the default task name or enter a unique name.
You can enter up to 32 letters, numbers, and symbols, except the
following:
\ / : , ; * ? " < > |
7. If you want to monitor the task after submitting it, select Go to tasks
window for status.
8. Click Apply to submit the task.
Related references
•
Remove Secondary Volumes window on page 296
152 Managing Thin Image Pairs
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English