Hitachi VSP G400 User Guide

Workflow for creating Thin Image pairs using Device
Manager - Storage Navigator
The pairs shown in the HDvM - SN main window are configured based on the
amount of snapshot data corresponding to the P-VOL, or the number of S-
VOLs that are assigned to snapshot data corresponding to the P-VOL.
The following image shows this configuration.
Creating Thin Image pairs using HDvM - SN involves the following steps.
1. Select the P-VOL.
2. Assign the S-VOL to snapshot data.
3. Confirm that you want to create the pair.
Related tasks
•
Creating Thin Image pairs using Device Manager - Storage Navigator on
page 130
Managing Thin Image Pairs 129
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English