Hitachi VSP G400 User Guide

7. If you want to monitor the task after submitting it, select Go to tasks
window for status.
8. Click Apply to submit the task.
Creating V-VOLs for Thin Image S-VOLs
Depending on the types of pairs with which you are working, there are two
options for creating a V-VOL for a Thin Image S-VOL. For pairs with the
snapshot attribute (snapshot pairs) for which the cascade attribute is enabled
(cascaded pairs) or for clone pairs, create a DP-VOL. You can use a non-
cascaded snapshot tree (using only root volumes and leaf volumes) even
when you create snapshot pairs that are cascaded. For information about
creating a DP-VOL, see the Provisioning Guide for your storage system. For
snapshot pairs for which the cascade attribute is disabled, create a Thin
Image V-VOL.
Before you begin
You must have the Storage Administrator (Provisioning) role.
Procedure
1. In the Explorer pane, click Storage Systems, expand the storage
system tree, and then click Pools.
2. In the Pools window, in the Pools tab, click Create LDEVs.
3. In the Create LDEVs window of the Create LDEVs wizard, complete or
review the following items, and then click Options:
• Provisioning Type
Configuring Thin Image 113
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English