Hitachi VSP G400 User Guide

Confirm that Snapshot is selected.
Required: Yes
• System Type
Verify that Open is selected.
Required: Yes
• Emulation Type
Confirm that OPEN-V is selected.
Required: Yes
• Capacity Compatibility Mode (Offset boundary)
Specify if you want to offset the specified LDEV capacity by boundary.
Values: ON or OFF
Default: OFF
• LDEV Capacity
Complete the following:
- Enter the amount of the LDEV capacity you want to create. Then
enter a number within the range of the figures displayed under the
text box. You can enter values up to two decimal places.
- Click the unit capacity menu to choose the capacity unit, TB, GB, MB,
or block.
• Number of LDEVs
Enter the number of LDEVs you want to create.
Range: (Shown below the text box.)
Required: Yes
• LDEV Name
Enter a name for the V-VOL.
- For Prefix, enter the case-sensitive alphanumeric characters, which
become the fixed characters that precede the V-VOL number.
- For Initial Number, enter the initial number for V-VOL, up to 9
digits.
- You can enter up to 32 characters in total for Prefix and Initial
Number.
4. In the Create LDEVs window of the Create LDEVs wizard, complete the
following additional items, and then click Add:
• Initial LDEV ID
Confirm that an LDEV identification number has been set. To confirm
the used number and unavailable number, complete the following
steps:
a. Click View LDEV IDs.
b. In the View LDEV IDs window, confirm the LDEV ID, and then click
Close.
• Initial SSID
Enter a 4-digit representation of a hexadecimal number.
Range: 0004 to FFFE
Default: 0004
114 Configuring Thin Image
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English