curlog/horcmlog_HOST/horcm.log, where the asterisk (*) is the
instance number and HOST is the host name.
The following figure shows an example of a log displayed in the CCI
window.
An error code string in the CCI operation log file looks like the following
example:
11:06:03-37897-10413- SSB = 0xB901,4A96
2. Locate the SSB1 and SSB2 codes. In the examples above, the error
codes appear to the right of "SSB =".
• The last four digits to the left of the comma (,) are the SSB1 code
(B9E1).
• The last four digits to the right of the comma (,) are the SSB2 code
(B901).
3. Locate the description of the SSB1/SSB2 error code combination in the
table in Command Control Interface SSB2 codes on page 214. For error
codes not described in this table, call customer support.
Command Control Interface SSB2 codes
This table lists the SSB2 codes when SSB1 is 2E31, B901, B9A8, B9A9,
B9AD, or B9AE, the related CCI command, and the cause of the error.
SSB2
CCI command Cause of error
9100 All commands You cannot run the command because the user authentication is
not performed.
9685 paircreate You cannot create the HTI pair because of a shortage of pair
tables.
9700 paircreate You cannot create the HTI pair because the pool is not available.
9702 paircreate You cannot create the HTI pair because you specified a pool ID
different from the pool ID used by existing pairs with the specified
P-VOL.
9703 paircreate You cannot create the HTI pair because the volume you specified
as the P-VOL is already used by another HTI S-VOL.
9704 paircreate You cannot create the HTI pair because the volume you specified
as the S-VOL is already used by another HTI P-VOL.
9705 paircreate You cannot create the HTI pair because the volume you specified
as the S-VOL is already used by another HTI S-VOL.
9706 paircreate You cannot create the HTI pair because another HTI pair is using
the snapshot ID you specified.
214 CCI command reference for Thin Image
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series
To Next Page
Loading...
Need help?
General