Hitachi VSP G400 User Guide

Note: To create pairs and assign the pairs to a snapshot group by
using CCI, see Creating Thin Image pairs and defining them in
snapshot or consistency groups using CCI on page 134.
13. Click Add.
The selected LDEV is moved to the Selected Primary Volumes table.
14. Click Next.
15. From the Available LDEVs table, select the LDEV you want to assign as
the S-VOL, and then click Set.
The selected LDEV is displayed in the Secondary Volumes column of
the Selected Pairs table.
Note:
• The nondisruptive migration volumes do not appear in the
Available Primary Volumes table.
• If you select a capacity in Capacity, the Available LDEVs and
Selected Pairs tables display the LDEVs that match the
selected capacity.
• If you select a row in the Available LDEVs table and a row in
the Selected Pairs table, and then click Set, you can configure
a pair.
• If you select LDEVs which were assigned to an S-VOL with the
Exclude Assigned Volumes check box unchecked, you can
change the S-VOL to which snapshot data is assigned.
16. Click Finish, and then confirm the settings.
17. Accept the default task name or enter a unique name.
You can enter up to 32 letters, numbers, and symbols, except the
following:
\ / : , ; * ? " < > |
18. If you want to monitor the task after submitting it, select Go to tasks
window for status.
19. Click Apply to submit the task.
Related concepts
•
Workflow for creating Thin Image pairs using Device Manager - Storage
Navigator on page 129
Related tasks
• Creating Thin Image pairs and defining them in snapshot or consistency
groups using CCI on page 134
•
Accelerating the Thin Image pair deletion process on page 148
132 Managing Thin Image Pairs
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English