Hitachi VSP G400 User Guide

Note: During the Thin Image pair restoration process, the pair
synchronization rate may not be up to date. The task must complete for the
rate to be up to date.
For the Thin Image pair where the cascade attribute is enabled, the
information displayed in Synchronization Rate (%) of the View Pair
Synchronization Rate window varies depending on the pair status.
For more information about restoring Thin Image pairs, see
Restoring Thin
Image pairs on page 141.
Before you begin
• You must have the Storage Administrator (Local Copy) role.
Procedure
1. In the Explorer pane, click Storage Systems, expand the storage
system tree, expand Replication, and then click Local Replication.
2. In the Local Replication window, select a P-VOL in the TI Root
Volumes tab or a snapshot group in the Snapshot Groups tab.
3. Click Operate TI Pairs.
4. In the TI Pairs window, select the pair for which you want to monitor
synchronization rates, and then click More Actions > View Pair
Synchronization Rate.
5. To check a pair's status and ensure the data is current, click Refresh.
The latest synchronization rates are shown.
162 Monitoring and maintaining Thin Image
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series

Hitachi VSP G400 Specifications

General

Brand	Hitachi
Model	VSP G400
Category	Storage
Language	English