Affirm Breast Biopsy Guidance System Service Manual
Appendix D: Biopsy Device Evaluation Procedure
Page 78 MAN-05754 Revision 002
D.1.2 Hologic Factory-Verified Biopsy Devices
Table 11: Hologic Factory-Verified Biopsy Devices
Hologic Affirm QAS Needle ASY-03949
Hologic Affirm with Lateral Arm QAS Needle ASY-09506
Hologic ATEC
®
9 g x 12 cm, 12 mm (Petite) ATEC 0912-12
Hologic ATEC 9 g x 12 cm, 20 mm ATEC 0912-20
Hologic ATEC 12 g x 12 cm, 20 mm ATEC 1212-20
Hologic ATEC 9 g x 9 cm, 12 mm (Petite) ATEC 0909-12
Hologic ATEC 9 g x 9 cm, 20 mm ATEC 0909-20
Hologic ATEC 12 g x 9 cm, 20 mm ATEC 1209-20
Hologic ATEC 9 g x 14 cm, 20 mm ATEC 0914-20
Hologic Eviva
®
9 g x 13 cm, 12 mm (Blunt Petite) Eviva 0913-12
Hologic Eviva 9 g x 13 cm, 12 mm (Trocar Petite)
Eviva 0913-12T
Hologic Eviva 9 g x 13 cm, 20 mm Eviva 0913-20
Hologic Eviva 12 g x 13 cm, 20 mm Eviva 1213-20
Hologic Eviva 9 g x 10 cm, 12 mm (Blunt Petite) Eviva 0910-12
Hologic Eviva 9 g x 10 cm, 12 mm (Trocar Petite)
Eviva 0910-12T
Hologic Eviva 9 g x 10 cm, 20 mm Eviva 0910-20
Hologic Eviva 12 g x 10 cm, 20 mm Eviva 1210-20
D.2 Configuring Device and Needle
D.2.1 Biopsy Device Parameters
Whether you add a new (or edit an existing) biopsy device, keep each parameter within
the valid range as stated in the following table. If you believe that a parameter for your
device is outside the valid range, contact Hologic Technical Support desk for guidance on
how to proceed.
To Next Page
Loading...
