Faxitron CT Specimen Radiography System User Guide
Chapter 6: Faxitron CT Software Operation
5081-9544 Revision 004 Page 51
6.5.2 Image Screen – 3D Mode
After an image is acquired in 3D mode four images will appear on the screen as shown
below. The bottom right image is a 3D rendering of the reconstruction volume. All other
views are reconstructed slice views of the specimen.
Figure 48: 3D Image Screen
When a CT scan is canceled for any
reason, i.e., door is opened, the Stop
button is pressed, or loss of detector
communication, the system will
generate a “CT Scan Canceled” error
message. The system will remain in
STANDBY for about 1 minute before it
is ready for another scan. See figure to
right.
Figure 49: “CT Scan Cancelled” Error Message
To Next Page
Loading...
