Honeywell C300 User Manual

4. C300 Controller Configuration
4.2. Create C300 Controller and CEE function blocks
50
Series 8 C300 Controller User's Guide
Honeywell
R500
April 2017
Step
Action
Result
TIP
If you have a Distributed Server Architecture (DSA), you must enter the Control Area
assignment for this Server. (Note that area code assignments are made through the
Station application.) If you do not have a DSA, you can skip this field if area is not
enabled through the Station application.

Honeywell C300 Specifications

General

Memory	512 MB RAM, 512 MB Flash
Type	Process Controller
Communication Ports	Ethernet, Serial
Power Supply	24V DC
Inputs	Analog and Digital
Outputs	Analog and Digital
Communication	Ethernet, Serial, HART
Redundancy	Supported (Hot Standby)