Honeywell C300 - Page 61

R500
April 2017
Series 8 C300 Controller User's Guide
Honeywell
57
4. C300 Controller Configuration
4.3. Configure CEEC300 block
REFERENCE - INTERNAL
Refer to the Experion LX Control Builder Components Reference, Component
Categories and Types and the Experion LX Planning Guide.
Step
Action
Result
22
Accept default or select another value
specific to the given environment from
the drop-down list.
Press <Tab>.
Moves cursor to Peer Store Expiration Time
column.
23
Accept the default or enter the desired
value. Click Batch tab.
Moves cursor to Batch Events Memory field.
24
Accept the default or select the
desired state from the drop-down list.
Click Server History tab.
The Server History configuration form
appears.
25
Use the on-line help as a guide to
complete the configuration entries on
this tab. Click the Server Displays
tab.
The Server Displays configuration form
appears.
26
Use the on-line help as a guide to
complete the configuration entries on
this tab. Click OK.
The form is closed.