Honeywell C300 - Page 60

56
Series 8 C300 Controller User's Guide
Honeywell
R500
April 2017
4. C300 Controller Configuration
4.3. Configure CEEC300 block
Step Action Result
14
Enter the appropriate value for the
time zone of the controller location.
Press <Tab>.
Moves cursor to the Daylight Savings Time
check box.
15
Select the check box if the Daylight
Savings Time is in effect for this
location. Press <Tab>.
Moves cursor to the Year Format field.
16
Accept the default or select the
desired format from the drop-down
list. Press <Tab>.
Moves cursor to the Weekday Format field.
17
Accept the default or select the
The Store Expiration Time Field is
desired format from the drop-down
highlighted in the Peer Defaults section.
list.
Click the Peer Configuration tab.
18
Accept the default or enter the desired
value. Press <Tab>.
Moves cursor to Subscription Period field.
19
Accept the default or select the
desired period from the drop-down
list. Press <Tab>.
Moves cursor to Number of Peer
Environments field.
TIP
The Number of Peer Environments and Peer Environment Table are interactive. The
value entered for the Number of Peer Environments determines how many rows appear
in the Peer Environment Table.
20
Enter the number of peer
environments for this controller. Press
<Tab>.
Or, skip this field, if no peer
environments will be used. Click
Server History tab and proceed to
Step 25.
If peer environments will be used, cursor
moves to the Peer Environment Name
column in the Peer Environment Table
section.
21
Enter the valid name for the existing
peer environment.
Press <Tab>.
Moves cursor to Peer Subscription Period
column.