Honeywell GX-Series User Manual

GX-Series Control Panel Installation and Setup Guide
6-102
4 = Alarm Mon.
This option controls encryption for the Alarm Monitoring alarm transmission paths. Default is disabled.
0 = Off
If selected encryption is disabled for the Alarm Monitoring alarm transmission paths.
1 = On
If selected encryption is enabled for the Alarm Monitoring alarm transmission paths. In order for
data to be received when this option is selected the receiver must support decryption.
56.4.10 Backup Module
This option allows another module to become the primary communication module if a line fail is detected on
the Ethernet module. There are 3 options:
1 = Off;
2 = NOT USED
3 = NOT USED
4 = NOT USED
5 = Int Telecoms
6 = Int RS232 1.

Honeywell GX-Series Specifications

General

Brand	Honeywell
Model	GX-Series
Category	Control Panel
Language	English