Function Parameter Reference Guide
140 UDC2300 Controller Product Manual 12/00
12.2.52 IN2TYP (INPUT 2 ACTUATION TYPE)
This prompt is part of the Input2 Set up group.
This selection determines what actuation you are going to use for Input 2.
Selections Definitions
DIS
0-20
4-20
0-5
1-5
0-2
DIS—Disable Input 2
0-20—0 to 20 Milliamperes
4-20—4 to 20 Milliamperes
0-5—0 to 5 Volts
1-5—1 to 5 Volts
0-2—0 to 2 Volts
12.2.53 L DISP (DISPLAY FOR TIMER OPTION)
This prompt is part of the Timer Set up group.
This selection allows you to select what is displayed for the timer option. The time is
shown on the lower display in hh:mm or mm:ss format along with a rotating “clock”
character.
Selections Definitions
TREM If the “clock” rotation is counterclockwise, time remaining is indicated.
ET If the “clock” rotation is clockwise, elapsed time is indicated.
12.2.54 LNGUAG (LANGUAGE)
This prompt is part of the Input 1 Set up group.
Select what the language will be for the displays.
Selections Definitions
ENGL
English
FREN
French
GERM
German
SPAN
Spanish
ITAL
Italian
NUMB
Numeric
To Next Page
Loading...
