HP Apollo 4200 Gen9 User Manual

Hardware options installation 73
3.
Remove the onboard PCI expansion slot cover.
4. Install the HBA.
5. Remove the plastic connector covers from the Mini-SAS x4 cable.
6. Connect the two Mini-SAS x4 cables to the ports 1 and 2 of the drive backplane.
7. Connect the other end of the Mini-SAS x4 cables to the HBA.
8. Depending on the location of the HBA, secure the Mini-SAS cables in the rear drive cage cable clip
or position them on top of the air baffle.

HP Apollo 4200 Gen9 Specifications

General

Brand	HP
Model	Apollo 4200 Gen9
Category	Server
Language	English