Figure 4-11 Opening the Processor Extender Board Latches
5. Pull out on the extraction levers to unplug the processor extender board from the socket
located on the midplane riser board. Figure 4-12 shows how to remove the extender board
from the server.
Figure 4-12 Removing and Replacing the Processor Extender Board
Replacing the Processor Extender Board
To replace the processor extender board, follow these steps:
1. Ensure the extraction levers are positioned in the outward, unlocked position.
2. Align the processor extender board with the front and rear card guides.
44 Removing and Replacing Components
To Next Page
Loading...
Need help?
General