Step Condition Action
4d There are RAID channel redundancy failures. Nothing is logged for this condition (system
health is off or steady green, and power is
steady green). Examine the LED next to
each RAID connector, and replace the
RAID HBA (if this LED is either steady
amber or steady red, it indicates RAID
drives are degraded or corrupted,
respectively).
The preceding issue is fixed when all of
these LEDs remain off, after next power on.
5 Cannot see OS prompt on system console. Front panel LEDs indicate that the server
power is turned on, and that the server is
either booting or running the OS. Nothing
might be logged for this condition (system
health is steady green, and power is steady
green). Examine the iLO 3 MP logs for
entries related to processors, processor
power modules (PPMs), shared memory,
and core I/O devices (see Errors and
reading error logs for details).
NOTE:
Be sure to check the console
settings from the Boot Manager for
your OS.
The preceding issue is fixed when OS
prompt appears on the system console.
Troubleshooting 89
To Next Page
Loading...
Need help?
General