HPE StoreVirtual 3200 - Installing the UID Health Module

9. Remove the UID health module retaining screw (1).
10. Slide the UID health module (2) out of the enclosure while guiding the cable through the enclosure.
CAUTION:
The UID cable is firmly adhered to the chassis. Care should be take to peel the UID cable
carefully off the enclosure chassis.
Installing the UID health module
Procedure
1. Install the replacement UID health module by sliding the cable through the slot in the enclosure.
2. Reconnect the UID health module cable to the backplane.
3. Adhere the UID health module to the chassis.
Installing the UID health module 101