HPE StoreVirtual 3200

• One for the 1 GbE network on Controller 1
• One for the 1 GbE network on Controller 2
• One for the VIP (Best Practice)
• All other interfaces are disabled
The following figure illustrates the cabling described.
Figure 19: Configuration using four Fibre Channel ports and two switches
1. Servers 2. Fibre Channel SAN
3. StoreVirtual storage system 4. Network cloud connections
5. 1 GbE iSCSI SAN
Connecting the StoreVirtual 3200 drive enclosure
Up to three HPE StoreVirtual 3200 drive enclosures can be connected to the array enclosure. The drive
enclosures must be connected to the array enclosure using an asymmetric cabling scheme as shown in
the following figures. The storage controllers must connect directly to the drive enclosure I/O modules.
Connecting the StoreVirtual 3200 drive enclosure 41