HPE StoreVirtual 3200

• For the location of the array enclosure LEDs, see Storage controller enclosure .
• For the location of the drive enclosures LEDs, see HPE StoreVirtual 3200 drive enclosure.
Common status LEDs
The following LEDs are used on both the array enclosure and the drive enclosure.
Table 1: Front panel system status LEDs
Indicator
1
Display Description
System status LED Green on Normal operation.
Amber on Critical fault.
Amber flashing Non-critical fault.
Locate UID Off Normal operation.
Blue on Location requested. Safe to
power off.
Blue flashing Location requested. Do not
remove.
1
These indicators are also located on the rear panel directly above fan 2.
Table 2: Power supply module status LED
Indicator Display Description
Status LED Green on Normal operation
Green off
Fault or no power
Table 3: Fan module status LEDs
Indicator Display Description
Status LED Green on Normal operation
Amber on Fault
All LEDS off Fault or no power
Locate UID Off Normal operation
Table Continued
16 Common status LEDs