HPE StoreVirtual 3200

Field Description
Password Password required to access the proxy server.
Confirm password Re-enter the password for verification
RSvS alarms
Remote Support via STaTS (RSvS) alarms help to identify any Remote Support-specific issues.
Viewing RSvS alarms
To access RSvS alarms, select Active Alarms from the StoreVirtual menu.
Table 19: RSvS alarm messages
Alarm message
1
Description
EID_RSVS_SUMM_STATUS_NOT_ENABLED RSvS service not enabled.
EID_RSVS_CONFIG_MISSING This message appears for one of the following
reasons:
• Customer contact information is either not
entered or partially entered.
• A selection was not made indicating that HPE
or partners could contact you to suggest
optimizations.
• Entitlement information could not be acquired
from the system.
EID_RSVS_CONN_STATUS_ERROR There are connectivity issues such as:
• Proxy server or Hewlett Packard Enterprise
URL is not reachable.
• DNS is not configured properly.
EID_RSVS_SUMM_STATUS_MAINTENANCE Device is under maintenance.
EID_RSVS_REG_STATUS_NOT_REGISTERED Device is not registered.
Table Continued
RSvS alarms 131