HPE StoreVirtual 3200

Procedure
1. Ensure that the fan module has failed by checking the fan module status LEDs. For the location of the
fan module LEDs, see HPE StoreVirtual 3200 drive enclosure on page 12.
For information on interpreting the status, see "Related reference".
2. Check the fan module heath in the Storage System Hardware Report available from the StoreVirtual
Management Console.
There is also an alert triggered when the fan module fails.
More information
Status LED descriptions on page 15
Removing a fan module
Procedure
1. Press in the fan module release buttons (1).
1
1
2
2. Slide the module (2) out of the enclosure.
98 Removing a fan module