Htek UC926 - Call Back

Basic Call Features
108
To configure the Call Return via Web interface
1. Click Function keys → Line or Line Key.
2. Select the desired Line or Line Key and select Call Return in the Type.
3. Click to save the configuration.
Call Back
When this option is set, if the phone you call is busy and does not set call waiting or voice mail,
your LCD screen will prompt for call-back, as shown in figure
If you press the callback, the phone will dial the Callback phone number.
To configure the Call Back via Web interface
1. Click Setting →Features →Callback .
2. Fill the Callback phone number.
3. Click to save the configuration.