Basic Setting Configuration
49
2. Select Disable or Enable or Auto for Daylight Saving Time.
3. Click to save the configuration.
Note:
If the IP Phone cannot obtain the time and date from the Simple Network Time Protocol
(SNTP) server, please contact your system administrator for more information.
Daylight Saving Time
Daylight Saving Time (DST) is the practice of temporary advancing clocks during the
summertime so that evenings have more daylight and mornings have less. Typically, clocks are
adjusted forward one hour at the start of spring and backward in autumn. Many countries have
used the DST at various times, details vary by location. The DST can be adjusted automatically
from the time zone configuration. Typically, there is no need to change this setting
LED Status Setting
The LED Status setting mainly defines the power indicator LED.
To configure LED Status via web interface:
To Next Page
Loading...
