Htek UC926 - DTMF

Function Key Features and Settings
132
This feature is not available on all servers. For more information, contact your system
administrator.
Intercom Barge
If this option is enabled, when there is an active call and an incoming intercom call arrives, the
previous call will be put on hold and the intercom call will be answered
1. Click the Setting

Preference
2. Set On or Off for Intercom Barge.
3. Click for the setting.
Note：
This feature is not available on all servers. For more information, contact your system
administrator.
DTMF
When the key is configured as DTMF key, you are allowed to send out the desired DTMF number
during the conversation.
To use this feature, you should sure that the DTMF Tone is on.
To configure the DTMF via Web Interface
1. Click Setting

Preference
2. Select On for Keypad DTMF Tone.
3. Click to save the configuration.
To configure the DTMF via Phone Interface
1. Press Menu → Features → Function Keys → Line or Line Keys as Function Keys → Line
Key1(for example)