Function Key Features and Settings
154
1. Press Menu →Features →Function Keys→ Line or Line Keys as Function Keys → Line
Key1(for example)
2. Select the wanted Line or Line Key.
3. Press and key to select the ACD.
4. Enter the label in the label field.
5. Select the desired account in the Account field.
6. Press or Save soft key to save the configuration
To configure the ACD via web interface:
1. Click Function keys →Line Key.
2. Select the desired Key and select ACD in the Type.
3. Enter the label in the label field.
4. Select the desired account from the pull-down list of Account field.
5. Click the button to save the configuration.
Note：
This feature is not available on all servers. For more information, contact your system
administrator.
Zero Touch
You can use this key feature to configure auto provision and network parameters quickly.
This feature is supported on the version 1.0.3.82 or later
To configure the zero touch via phone interface
1. Press Menu →Features →Function Keys→ Line or Line Keys as Function Keys → Line
Key1(for example)
2. Select the wanted Line or Line Key.
To Next Page
Loading...
