Htek UC926 - Other Key Led; User Interface

Getting Familiar with Your Phone
29
Other Key Led
User Interface
There are two ways to customize specific configurations on your IP phone:
 The user interface on the IP phone
 The user interface in a web browser on your PC
The hardware components keypad and LCD screen constitute the phone user interface, which
allows the user to execute all call operation tasks and basic configuration changes directly on the
phone. In addition, you can use the web user interface to access all configuration settings. In many
instances, it is possible to use both the phone user interface and the web user interface to operate
the phone and change settings. However, in some instances, it is only possible to use the phone or
the web user interface.
Phone Interface Overview
Option
Status
Model
IP
MAC
progressing status.
Blinked red every 100ms
Alerting
Stay green
a member of the SCA group in active status
when there is an incoming call designated
for the SCA group
Stay red
Other member of the SCA group’s led status
when a member of the SCA group in active
status
Key
Description
Headset Key
When using in headset mode, the led is
steady green or the LED is off.
Message Key
Blinked green when there is a new message
or the LED is off.
Mute Key
Red when the mute the call, or the LED is
off.