Basic Setting Configuration
44
Time and Date
Time and date is displayed on the idle page, and it can be set automatically by SNTP server or
manually by manual setting.
To configure the time and Date by SNTP setting via phone interface
6. To press Menu → Setting → Basic setting → Time & Date → SNTP Settings
7. Press or to change the Time zone.
8. Fill the NTP server1, NTP Server2, and Daylight Saving.
9. Press or Save soft key to save the configuration.
To configure time and date manually via phone interface
1. To press Menu → Setting → Basic setting → Time & Date → Manual Settings
2. Press and or change the right time, or you can input the right time.
3. Press or Save soft key to save the configuration.
To Next Page
Loading...
