Function Key Features and Settings
147
1. Click Function keys → Line Key.
2. Select the desired Line or Line Key and select URL Record in the Type.
3. Click the button to save the configuration.
Paging
With this feature, you can call a paging group directly.
To configure the paging via phone interface
1. Press Menu →Features →Function Keys→Line Keys as Function Keys → Line Key1(for
example)
2. Select the wanted Line or Line Key.
3. Press and key to select the Paging.
4. Enter the paging code followed the number.
5. Press or Save soft key to save the configuration
To configure the Paging via Web interface
1. Click Function keys → Line Key.
2. Select the desired Line Key and select Paging in the Type.
3. Enter the paging code followed the number.
4. Click the button to save the configuration.
Shared Line
Htek IP Phone supports “Shared Call Appearance” by Broadsoft and XCast standard. This feature
allows members of the SCA group to shared SIP lines and provides status monitoring (idle, active,
progressing, hold) of the shared line. When there is an incoming call designated for the SCA group,
To Next Page
Loading...
