Htek UC926 - Dial-Now Timeout

Basic Setting Configuration
82
Note:
Illegal input will fall back to default: {[x*]+}. For More, please refer to dial plan on
www.htek.com
Dial-Now Timeout
Dial-Now Timeout means that when you enter the number which is matching with dial plan, it will
dial out automatically after some time when you stop entering the number.
To configure Dial-Now Timeout via web interface:
1. Click Webpage Setting → Preference
2. Fill the blank of Dial-Now Timeout: for example, 5(seconds). (0 means dial out
immediately).
3. Click the button to save the configuration