Function Key Features and Settings
126
6. Click to save the configuration.
To configure a Voice mail key by phone interface:
1. Press Menu →Features →Function Keys→ Line or Line Keys as Function Keys → Line
Key1(for example).
2. Select the targeted Line or Line Key.
3. Press and key to select the Voice mail in the type field.
4. Enter the Value Number.
5. Press and key to select the Account ID.
6. Press or Save soft key to save the configuration
To leave a voice mail:
You can leave a voice mail when the receiver is busy or its inconvenient for them to answer the
call. Follow the voice prompt from the system server to leave a voice mail, and then hang up.
To listen to voice mails:
When the phone interface prompts receiving new voice mail’s icon, the power indicator LED
flashes red(Setting->Preference: Enable Voice Message Status) and the voice message button
flashes green.
1. Pressing or the targeted Line or Line Key to dial out the voice mail access code.
2. Follow the voice prompt to listen to voice mail.
To view the voicemail via phone interface:
Press Menu->Messages->Voice Mail->View Voice Mail.
The LCD screen displays the amount of new and old voice mails
To Next Page
