Htek UC926 - Page 56

Basic Setting Configuration
56
To configure IPv6 via Web interface:
1. Click Network

Basic

Internet Port
2. Select IPv6 for Internet Port
3. Click for the setting.
To configure DHCP via phone interface:
1. Press Menu

Setting

Advanced Settings (password: admin)

Network

WAN Port
IPv6DHCP mode.
2. Click Save and restart the phone.
To configure a static IP address via phone interface:
1. Press Menu

Setting

Advanced Settings (password: admin)

Network

WANPort
IPv6 Static mode.
2. Enter the parameters: IP, IPV6 Prefix, Gateway, Pri. DNS(primary dns), sec. DNS(second
DNS) in the corresponding fields.