9. Select boot options to be configured, and press + or - to change the boot sequence. Set
the first boot option to PXE.
The option at the top of the boot option list is the first boot option, and the one at the
bottom is the last boot option.
– To move a boot option up, press +.
– To move a boot option down, press -.
Enable the PXE function for a network port.
10. Choose Advanced > PXE Configuration and press Enter.
The PXE Configuration screen is displayed, as shown in Figure 5-10.
NOTE
The PXE Configuration screen displays four network ports, in which PXE1 is Enabled and other
network ports are Disabled by default.
Figure 5-10 PXE Configuration
11. Select the network port to be configured, and press Enter.
12. Choose Enabled from the shortcut menu and press Enter to enable the PXE function for
the network port.
Set the BIOS password.
13. Select the Security tab.
The Security screen is displayed, as shown in Figure 5-11.
5288 V3 Server
User Guide
5 Configuring the 5288 V3
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 104
To Next Page
Loading...
