Table 5-5 lists the default data for setting the management network IP address.
Table 5-5 Default information
Item Parameter Default Value
iBMC management
network port
information
IP address and subnet
mask of the
management network
port
l IP address: 192.168.2.100
l Subnet mask: 255.255.255.0
iBMC management
system login
information
User name and
password
l User name: root
l Password: Huawei12#$
BIOS Password The default BIOS password is
Huawei12#$ for the American keyboard,
Huqzei&é34 for the French keyboard,
and Huawei12£$ for the English
keyboard.
NOTE
When entering the BIOS password on the
remote virtual console:
l If the keyboard type configured in the OS
is the same as the actual keyboard type,
enter the password by using the actual
keyboard.
l If the keyboard type configured in the OS
is different from the actual keyboard type,
enter the password by using the keyboard
configured in the OS.
Procedure
l Set the IP address of the management network port on the iBMC WebUI.
a. Log in to the server iBMC WebUI.
For details, see 9.2 Logging In to the iBMC WebUI.
b. Choose Config > Network Settings.
The Network Settings page is displayed.
c. Set an IP address for the management network port, as shown in Figure 5-16.
Figure 5-16 Setting an IP address for the management network port
5288 V3 Server
User Guide
5 Configuring the 5288 V3
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 109
To Next Page
Loading...
