Table 7-1 Mapping
Hard Disk Position Panel Silkscreen Slot ID
Front hard disks 0 to 23 DISK0 to DISK23
Rear hard disks
l With one RAID
controller card: 24 to 35
l With two RAID
controller cards: 0 to 11
l With one RAID
controller card: DISK24
to DISK35
l With two RAID
controller cards: DISK0
to DISK11
Rear hard disks HDD A0, HDD B0, HDD
A1, and HDD B1
DISKA, DISKB, DISKC,
and DISKD
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Step 3 If a front hard disk needs to be removed and the server is equipped with a front bezel, remove
the bezel. For details, see 7.3 (Optional) Removing the Front Bezel.
Step 4 Determine the position of the hard disk (for example, a front hard disk) on the 5288 V3. See
Figure 7-10.
Figure 7-10 Hard disk position
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 128
To Next Page
Loading...
