Step 5 Remove the 5288 V3 and put it on an ESD desktop. For details, see 3.6 Removing the
Server.
Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 Remove the riser card above the TPM. For details, see 7.19 Removing the Riser Card.
Step 8 Determine the TPM position. See Figure 7-50.
Figure 7-50 Determining the TPM position
Step 9 Loosen the screw on the TPM using a Phillips screwdriver. See step (1) in Figure 7-51.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 164
To Next Page
Loading...
