Figure 7-65 Removing the supercapacitor (PM8060)
1. Remove the cable between the supercapacitor and the RAID controller card. See step (1)
in Figure 7-65.
Step 10 Horizontally open the plastic latches that secure the supercapacitor. See step (4) in Figure
7-64 and step (2) in Figure 7-65.
Step 11 Exert even force to lift the supercapacitor out of the server. See step (5) in Figure 7-64 and
step (3) in Figure 7-65.
Step 12 Place the removed supercapacitor in an ESD bag.
----End
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 180
To Next Page
Loading...
