Step 5 Insert the flexible NIC into the chassis and then push the flexible NIC horizontally into the
chassis until the flexible NIC is connected to the connector on the mainboard. See step (1) in
Figure 7-92.
Figure 7-92 Installing a flexible NIC
Step 6
Tighten the two screws using the Phillips screwdriver to secure the flexible NIC. See step (2)
in Figure 7-92.
Step 7 Connect the cables to the flexible NIC.
Step 8 Install the I/O module. For details, see 7.20 Installing a Riser Card.
Step 9 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 10 Install the 5288 V3. For details, see 3.4 Installing the Server.
Step 11 Connect all internal cables such as power and network cables. For details, see 3.5 Connecting
External Cables.
Step 12 Power on the 5288 V3. For details, see 4.1 Powering On the Server.
----End
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 209
To Next Page
Loading...
