Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the position of the SD card to be replaced. See Figure 7-101.SD card 1 is above
the SD card mezzanine card, and SD card 2 is below the SD card mezzanine card.
Figure 7-101 SD card position
Step 3
Remove the SD card to be replaced. For details, see 7.47 Removing an SD Card.
Step 4 Take the spare SD card out of its ESD bag.
NOTE
The spare microSD card cannot contain any data.
l If the server has only one microSD card, and the OS is installed on the card, migrate the important
data on the SD card to another storage device before the replacement.
l If the server has two microSD cards, install the new microSD card in the same slot as the replaced
one.
Step 5 If the SD2 card needs to be installed, you need to remove the SD card first. For operation
details, see 7.47 Removing an SD Card.
Step 6 Insert the SD card into the mezzanine card. See Figure 7-102.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 217
To Next Page
Loading...
