Step 11 Push the mainboard frame out of the chassis by holding the mainboard handle. See step (3) in
Figure 7-108.
Step 12 Press the release button and pull the mainboard out of the chassis completely. See steps (1)
and (2) in Figure 7-109.
Figure 7-109 Pulling out the mainboard frame
Step 13 Remove the rear hard disks from the rear hard disk backplane.
Step 14 Remove all cables from the rear hard disk backplane. For details, see 2.7 Internal Cabling.
Step 15 Hold down and open the latch on the rear hard disk backplane, lift the backplane until it
cannot move upward, and pull it out in the arrow direction to remove it. See Figure 7-110.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 226
To Next Page
Loading...
